OL2111 AC Solid State Relay Module

OL2111

**OL2111 AC Solid State Relay Module**
Outputs	8	Card Cage Power required	120 mA
Output Type	SSR (Triac)	Commons	2 (connected internally)
Voltage Rating	12 - 132 VAC	Status indicators	Logic side LED
Max. load current	1A/point
Min. load current	10mA	Terminal Strip	Plug In (removable)
On state voltage drop	1V (typical)	Terminal screws	Slotted (0.1" blade max.)
Peak one cycle surge current	15A	Maximum terminal wire gauge	18 AWG
AC frequency	47 - 63 Hz	Weight	1.3 oz (35g)
Type	9	Subtype	3

The OL2111 Solid State Relay module provides eight (8) solid state relay outputs. This module is ideally suited for switching small AC loads. As a solid state device, switch wear will not be a factor. Each output is optocoupled for system isolation. Individual LED indicators provide visual feedback indicating the state that each relay is being driven.