Modular, economical, snap together fieldbus I/O and operator panels from a proven leader in industrial automation.
An excelent option to develop PC control or Ethernet/Internet I/O

Optimation's OptiLogic™ Remote Terminal Unit provides point of use I/O and operator panel capabilities with a high speed link to a PC.
OptiLogic™ delivers the highest levels of flexibility, ease of use and performance at the lowest cost of any PC-based distributed I/O subsystem on the market.

The OptiLogic™ Remote Terminal Unit (RTU) is modular in design. It allows you to plug together any combination of analog and digital inputs and outputs that will fit in the available slots.
The card cage base snaps onto a standard DIN rail for back panel mounting.
If an operator panel is required, the base snaps onto any variety of available OptiLogic™ operator panels, which can in turn be panel mounted.
The Ethernet connection provides a 10BaseT connection to the network.

A System built with OptiLogic™ RTUs allows you to monitor and control equipment and systems spread throughout a building. A PC with a standard Ethernet connection can serve as the central controller. Input data, output control and operator panel operation are only a millisecond response away.

If you are a software professional, you can easily develop your own software to run on the PC and interface OptiLogic™ RTUs. A Software Development Kit is available for such purposes.
If you are not a software professional, or you are looking for a more efficient way to develop your application, easy to use development packages are available from companies such as Think & Do.

Thanks to the many built-in communication protocols, the Super PLCs also make more than great serial-based I/O boards for PCs or Workstation!

PLC as I/O boards

Thanks to the many built-in communication protocols, the Super PLCs also make more than great serial-based I/O boards for PCs or Workstation!

  

Optilogic modules

New technologies, excelent solutions, affordble pricing. You can choose among a lot of input and output modules for your applications

  

Optilogic Panels

The Optilogic Series allows you to snap on operator panels. There is a growing variety of available operator panels which can easily be attached to any Optilogic base.
  Bases
 





OL 4054
4 slot RTU Base

US149

OL 4058
8 slot RTU Base

US199

   

I/O Modules
OL 2104
OL 2108
OL 2109
OL 2111
OL 2201
4 Relay  
8 Relay Out
8 Point, 5-40
8 Point Solid
8 Point Digital
out module
Module 
VDC sinking
State Relay
Input
US42
US53
output 
output 
Simulator
US53
US89
Module
     
US46
       
 
OL 2205
OL 2208
OL 2211
OL 2252
OL 2258
4 point input, 
8 Point
8 Point AC
2 Channel
High Speed Pulse Counter
10-30V AC/DC
Input. 10-30
Input. 80-132
0 - 15 KHz
Pulse & Direction
 US42
VDC (sourcing
VAC. 
US59
Up/Down Count or Quadrature
 or sinking)
 US53
 
US119
US46
 

 
 
OL 2304
OL 2408
 
Four Channel Voltage Output
8 Channel, 14
 8 Channel, 14
 2 Channel
  
0-5V, 0-10V, +/-5V, +/-10V
bit, 0-5 VDC or
 bit, 4-20mA
 RS232C
  
(individual channel configurable)
0-10 VDC
 analog input
 US64
  
US199
analog input.
US199 
  
US189